Iron Product

SS-3300-K is used for general food cans which do not require oil resistance. Especially, it is appropriate for beverage cans, beer, fruit juice, carbonated drinks etc.
The compound is suitable for use in either two-piece or three-piece cans of either tin-plate or aluminum.

SS-3310-KR is a solvent base type can sealing compound with synthetic rubber as its main component developed mainly for use in beverage cans.

Appearance

:

Gray viscose liquid

Specific Gravity

:

0.82 +/- 0.02 (25?)

Dried Specific Gravity

:

1.28 +/- 0.02 (25?)

Proportion of Solids in %

:

40 +/- 2 %

Viscosity

:

2,000 +/- 4,000cps(#4 25,20 R.P.M.)

Handling and Storage

Since SS-3310-K is made of N-Hexane, a petroleum hydroocarbon at low boiling point, proper care should be given to the handling and storage. It should be stored at a cool(20~25?) and well-ventilated place free from flames and direct sunlight so that no chance of fire is allowed.

Stirring

When the sealing compounds are long stored, deposit may occur. So, stir the drum well before using them.
If dilution is needed to reduce the viscosity, dilute the compounds with N-Hexane.
For mixing, use a mixer for 1-2 hours to mix the compounds before using them.

Drying

The solvent for the compound is N-Hexane, which requires no special drying facilities. Dry the compound at ambient temperature. For drying, allow good ventilation for at least 48 hours so no remaining solvent should be left.

Use

SS-3310-K is a quick-drying compound. Preheating will improve the workability and allow the compound to dry quicker. Preheating should be performed within the range of 37~45? and in the environment where there is no danger of explosion.