Iron Product

This solvent base sealing compound SS-3310-KR is used for food cans which do not requir oil resistance. Especially, it is appropriate for food cans which should be high-pressure sterilized, such as juices, fruits, coffee and other agricultural products.

SS-3310-KR is a solvent base sealing compound made mainly of synthetic rubber for beverage and juice cans.

Appearance

:

Gray viscose liquid

Specific Gravity

:

0.84 ?0.02 (25?)

Dried Specific Gravity

:

1.28 ?0.02 (25?)

Proportion of Solids in %

:

40 ?2 %

Viscosity

:

6,000 ? 3,000cps(#4 25?,20 R.P.M.)

Handling and Storage

Since SS-3310-KR is made of N-Hexane, a petroleum hydroocarbon at low boiling point, proper care should be taken to avoid high temperature and direct sunlight so that no fire is allowed.

Stirring

When the sealing compounds are long stored, deposit may occur. So, stir the drum well before using them.
If dilution is needed to reduce the viscosity, dilute the compounds with N-Hexane.
For mixing, use a mixer for 1-2 hours to mix the compounds before using them.

Drying

The solvent for the compound is N-Hexane, which requires no special drying facilities. Dry the compound at ambient temperature. For drying, allow good ventilation for at least 48 hours so no remaining solvent should be left.

Use

SS-3310-KR is a quick-drying compound. Preheating will improve the workability and allow the compound to dry quicker. Preheating should be performed within the range of 37~45? and in the environment where there is no danger of explosion.